Ever had a break down on a ride or got your snowmobile stuck in the snow or, even worse, hit a rock and break an A-Arm? If so, you really know the importance of having some handy tools. You might be lucky if you rode your whole life without having a breakdown.
But this is not always the case. You should get prepared for the breakdowns anytime. If you own an old sled, there are chances that it will need some adjustments or hotfixes once in a while. Having a snowmobile toolkit is absolutely necessary to be safe and also to be able to continue the ride in case of any event.
My Personal Recommendation
There are many tool kits available online that can be used for snowmobiles. But, from all of these, I like CruzTOOLS RTH3 RoadTech H3 Standard Tool Kit.
As the name suggests, it’s a standard tool kit, which means it can be used for a variety of vehicles snowmobiles, snow bikes, dirt bikes, motorcycles, utility vehicles, and more.
It comes with all the standard tools that you may want in your snowmobile tool kit.
You’ll get these tools in your tool kit.
- Wrench Sets
- Socket Sets
- Hex and Star
- Spark Plug Socket
- Nut Drivers
- Locking Pliers
- Slip-Joint Pliers
- Needlenose Pliers
- Axle Hex Adapter
- Spark Plug Gap Gauge
- Electrical Tape
- Cable Ties
- Mechanics Wire
This tool kit is tried and tested by a lot of users, and they loved it. However, one thing you should know that it’s a standard tool kit, not a specially designed snowmobile tool kit.
Then Why This Tool Kit?
The reason behind it is that there is no good snowmobile tool kit available, which I can recommend, and I don’t want to recommend just any tool kit for you.
If I talk about the CruzTOOLS Standard Tool Kit, it contains most of the tools that you may want in your snowmobile tool kit.
However, if you want a few extra things, then you can purchase them separately. A few of them are listed below.
- Snowmobile Tow Rope (Read my article about finding reliable tow straps)
- Electrical or Duct Tape
- Emergency Starter Rope
- Vise Grips (Replacing recoil rope or removing your snowmobile’s sliders becomes easy with vise grips)
- Siphon Hose (A hose is essential if you want to borrow some fuel from another snowmobile in case if you’re out of gas)
- Fire Starter
- Paper Towel
What tools you should have in your Tool Kit?
Spare Spark Plugs
Fouled spark plugs are the most common issues you may have to deal with as a snowmobile owner, whether they are attributed to the oil mixture/gas or because your plugs run too cold. Keep a couple in reserve to swap them quickly.
Small Socket Wrench Set
A small socket wrench set is going to be an invaluable tool for many simple maintenance and repair items.
Slotted and Philips Screwdriver
For everything your wrench set cannot address, Philips and Slotted screwdrivers can. From replacing the studs to making the ski adjustments, you will require both varieties of a screwdriver to complete a range of simple tasks.
Spark Plug Tool
In order to properly replace and remove the plugs without stripping them, you will need a spark plug tool. Keep one handy all time.
Electrical or Duct Tape
Some flexible tape can be a great way to make a quick fix in no time! Tape up loose or exposed wiring or repair a small crack in your grips with a swift but sturdy tape job.
Emergency Starter Rope
If the recoil starter pull cord fails you out on the trails, it will be a long walk back to the camp or, at the very least, an uncomfortable wait for the person to come and get you. Pack an emergency starter rope at all times so that if the worse happens, you can switch and get back to the riding.
If you drive your snowmobile far away from home, you will need a tow to get back to basecamp. Discount Ramps offer heavy-duty tow rope having loop ends, which allows a friend to safely tow your rig back to where you can make the repairs.
A siphon hose will undoubtedly be vital. The simple resource will help you borrow some fuel from another sled, to get you back to the fill-up point.
Replacing your recoil rope or removing your snowmobile’s slider is made easy with vise grips, as this makes them an essential tool to have out on a trail. Pack a compact pair and also consider yourself covered if a variety of issues occur.
Another necessary repair item that can be used in a pinch, zip ties provide a temporary solution to any problem. These ties are strong to stand up to some hearty wear and tear and also easy enough to apply quickly.
Nothing sidelines a snowmobile like a broken or damaged belt. To get back on the trail and back to the excitement, stock a replacement belt, which is ideal for your sled.
Like WD40 and duct tape, a baling wire is considered a core ”fix-it” item. If you are in the position to make an ad-hoc repair, the baling wire will be one of the materials you will rely on.
Oil and Fuel
If your sled is a two-stroke, you will need to bring along some extra oil. You may be religious about keeping your oil topped off before each side, but there will also be one time that you forget, and you will also be glad that you had extra fuel to get you back to the trailhead.
If you have room, or also a way to carry it, such as on the tunnel mounted tank, the spare gas is always a great idea if you do not end up using them for obvious reasons.
It is always a good idea to carry at least two tie-down straps at all times. For instance, in the unfortunate event, you break an A-Arm or snap a spindle on a tree, you can lash the a-arm and also ski-together with the tie-down.
Once it is lashed together, use the other tie-down to strap it to the side and back of your buddies sled for the tow home. Ratchet tie-downs having high test strength are probably the best type, but any standard tie-downs need to get the job done.
This is useful when fixing the bent or the crushed parts, hoses and other stuff.
It is very important to have one, but no one really mentions it. A headlamp can also be very useful.
Does New Snowmobiles Come with Tool Kit?
Most snowmobiles come with a stock tool kit located under the snowmobile’s seat or hood. This will most likely include a set of wrenches, spark plug wrench, screwdrivers, and a strap for emergency starting.
This is most likely different for each brand and generation of the sled. It is very essential for what you might need in certain events. No matter how experienced the rider is, few unexpected situations may arise, and hence it is always best to be prepared and not take any risks when it comes to safety.
How to Purchase a Snowmobile Tool Kit?
Tools for Long Run
The cost of something is one of the main factors while purchasing. Compromising for tools when it comes to the snowmobiling or the ski-doo, which may occur at the lower price, may end up costing you more.
So if you need to get the job done with the best, and in no time, it is no secret that choosing tools that provide value for money is one of the smart choices.
Better Safe than Sorry
Your comfort is essential, but what is necessary is your safety too. Tools aren’t something that you should buy by compromising on the safety aspect. This is why the tools you choose should be designed aptly. While you lookout for the tools, check if they have cushioned handgrips, angled handles, and also double-dipped with non slipped cushions to offer a strain-free usage.
Branded tools required for a snowmobile or Polaris never disappoint you when it comes to durability and quality. The tools need to make sure to get quality checked and are also crafted by using superior technologies for better durability and usage.
With the help of the world wide web, it is now effortless to access the information on any topic. Before you plan to purchase any desired tool for your snowmobile or arctic cat, ensure to find out which tool you exactly require. Based on the reviews, too, it will help you make an informed choice on which the tool fits your need perfectly.
Why You Need a Snowmobile Tool Kit?
Having a spare saves the rider from getting sidelined. Most of the sleds come with a handy tool to help you get the job done. Most snowmobiles used to come with a handy tool kit. These tool kits can help bind your machine together if you need to limp back home.
It does not matter how experienced the rider is, a few bad situations can arise anytime and hence it is always necessary to be prepared and also not risk with your life when it comes to safety.
If your snowmobile comes with a full tool kit, then that’s great! You will surely find most of the tools required. But if your sled does not have one, it is suggested to set up a minimum toolkit that will let you solve trivial problems. Know your snowmobile and get only those tools required for them.
Snowmobiling is an enthusiastic activity but not to play with the risk of life, right? Next time you go out on a snowmobile to make sure to have all the above tool kits for safety.